Payment & Shipping Terms:
|Cable Name:||VV62 LV Armoured Cable||Conductor Material:||Aluminum|
|Size:||10~1000 MM2||Cores:||One Core|
|Insulation:||PVC||Sheath:||PVC Type ST2|
|Standards:||IEC / BS / IS / VDE||Warranty:||2 Years|
|Sheath Color:||Black, Customized|
Used as power distribution and transmission line at rated voltage 0.6/1kV.
Suitable for burying in ground, laying down wells and under water. Able to bear certain axis pulling force.
Conductor: Plain circular stranded copper conductor, conforms to IEC 60228 class 2
Inner Covering: PVC
Armoring: Steel Wire
Sheath: PVC/ST2 to IEC 60502, black
Rated voltage:0.6/1kV Low Voltage
Maximum Conductor Temperature: under normal (75 ℃), emergency (130℃) or short circuit no more than 5 s (160℃) conditions.
Min. Ambient Temp. 0 OC, after installation and only when cable is in a fixed position
Min. Bending Radius: 15 x cable O.D for single core with armor
International: IEC 60502, IEC 60228, (IEC 60332-3 for FR-type only)
China: GB/T 12706, (GB/T 18380-3 for FR-type only)
Other standards such as BS,DIN and ICEA upon request
Type Description & Application Occasion
|Application Occsion||GB China Type|
|PVC insulation,Steel tape armor,PVC sheath power cable||To be laid underground,the cable could bear certain mechanical force.||VV22||VLV22|
|PVC insulation,have on the magnetism steel tape armor,PVC sheath power cable||VV62||VLV62|
|PVC insulation,thin steel-wire armor PVC sheath power cable||Be applicable to the well,underwater with the bottom of sea,the cable cable cans bear the bigger pressure with lead to pull the dint.||VV32||VLV32|
|PVC insulation,have no the magnetism thicks tell-wirer armor,PVC sheath power cable||VV72||VLV72|
|PVC insulation,thick steel-wire armor,PVC sheath power cable||VV42||VLV42|
PACKING AND SHIPPING
We are capable of meeting the most strict delivery schedules according to per purchase order. Meeting the deadline is always the top priority as any delay in the delivery of cable can contribute to overall project delay and cost overrun.
Cable is supplied in wooden reels, corrugated boxes and coils. Cable ends are sealed with BOPP self adhesive tape and non-hygroscopic sealing caps to protect the cable ends from moisture. The required marking shall be printed with a weather-proof material on the outsides of drum according to customer's requirement.
1. The process of production and inspection applies to Electric Power Cable, Control Cable, Aerial Cable, House Wiring Cable and so on. The process is not all same for different types of products.
2. The process with the mark is for medium voltage power cable.