Product Details:
Payment & Shipping Terms:
|
| Product Name: | Low Conductor Resistance Pure Copper XLPE Insulated Power Cable | Insulation Material: | Cross-Linked Polyethylene (XLPE) |
|---|---|---|---|
| Conductor Material: | 99.99% Pure Annealed Copper | Conductor Resistance: | Complies With IEC 60228 Class 2 |
| Application: | Power Transmission, Industrial Plants, Substations | Rated Voltage: | 0.6/1 KV |
| Conductor Type: | Stranded Compacted Copper | Sheath Material: | PVC Outer Sheath |
| Highlight: | low conductor resistance,pure copper xlpe cable,high conductivity power cable |
||
Low Conductor Resistance Pure Copper XLPE Insulated Power Cable is made for buyers who count energy losses in kilowatt-hours and money. This low conductor resistance cable uses 99.99 percent pure annealed copper conductors that meet IEC 60228 Class 2, so resistance per kilometre stays low and I2R losses shrink. For long feeders and continuous industrial loads, a high conductivity power cable with genuinely low conductor resistance pays for itself through reduced heat and lower electricity waste.
The pure copper xlpe cable design compactly strands the copper to increase the fill factor, which brings conductor resistance even closer to the theoretical minimum. Combined with a cross-linked polyethylene insulation rated for 90 C continuous duty, this low conductor resistance cable carries more current in the same cross-section, letting designers reduce copper usage without sacrificing performance. Every reel of this pure copper xlpe cable is routine tested for DC resistance and voltage withstand, so the high conductivity power cable you receive matches the datasheet value.
| Parameter | Specification |
|---|---|
| Product Name | Low Conductor Resistance Pure Copper XLPE Insulated Power Cable |
| Rated Voltage | 0.6/1 kV |
| Conductor | 99.99% pure annealed copper, Class 2 |
| Insulation | Cross-linked polyethylene (XLPE) |
| Outer Sheath | PVC |
| DC Resistance | Within IEC 60228 Class 2 limits |
| Continuous Temperature | 90 C |
| Cores | 1 to 5 cores |
Q: How low is the conductor resistance of this pure copper xlpe cable?
A: It meets or beats the IEC 60228 Class 2 limit, so this low conductor resistance cable keeps losses low across the full cross-section range.
Q: Why prefer a high conductivity power cable over aluminium?
A: Copper lowers resistance and voltage drop, making this low conductor resistance cable ideal for high-current, long-run feeders.
Q: Is this pure copper xlpe cable tested before shipment?
A: Yes. Every reel of this low conductor resistance cable undergoes DC resistance and high voltage tests.
Shenghua draws and anneals its own copper so that the low conductor resistance of every length can be certified against IEC 60228. Each pure copper xlpe cable reel is measured for DC resistance and voltage withstand, and the results are recorded on the drum certificate, so the high conductivity power cable you receive matches the datasheet. Because copper purity drives loss, we keep the low conductor resistance cable at or below the Class 2 limit, and the high conductivity power cable is available with compacted stranding to lift the fill factor further. Designers who compare a pure copper xlpe cable against aluminium for a long feeder will see the low conductor resistance cable reduce voltage drop and heat, and our engineers will share the resistance table for any size.
Q: Can you supply the DC resistance table for this pure copper xlpe cable?
A: Yes, we share IEC 60228 values, and every low conductor resistance cable ships with measured data.
Q: Why is a high conductivity power cable better for long feeders?
A: Lower resistance means less voltage drop and heat, so the low conductor resistance cable saves energy over the run.
